How to Do a Venetian Plaster
Venetian plaster is not coming to age any time so as it has been there for a very long time now. The first thing that you need to do when it comes to Venetian plastering is choosing the plaster you want to use. There are two types that you can make your choice from; either synthetic plaster or lime-based plaster. To make a great choice you can get help from the following points. You can decide to work with whatever money you have and you can also work based on the level of expertise at your disposal. Unlike other plasters that will become stone after sometime, lime based plasters are best known highly because of their beauty retention. This in the long run makes them very challenging to use and even more expensive.
Gather all your tools at http://artisticimpressionspa.com/#!venetian-plaster then lay your tarps as expected. The painting form of laying tarps will be a good way to have it done. Some cracks may form with time if you use a painters tape in this case. Plaster may easily bond with the painters tape. Prepare your walls after the above process. It is no miracle if your wall has holes and bumpy surfaces. The best thing about synthetic plaster is the fact that it could be used to fill the holes.
You will have failed to do a good preparation if the primer is not sufficiently done. Make sure the primer is spread on the wall evenly and lightly. A second primer is necessary at times if you want to achieve a smoother primer. Lime based plasters are demanding sometimes as you will need to apply a specific primer called fondo while the others will adhere to all the other primers. Otherwise you will need to let it dry first.
The first thing that you will need to do is to ensure that your trowel is in the best of conditions. A 100 grit sandpaper is the best to use for preparation purposes. All the corners should be rounded keenly to make them as smooth as possible. This will one way or the other reduces edge marks or lines that will unnecessarily form during application. This leads you to the process of applying your plaster. There will be the first and the second application with a few minutes of drying. Click here to know more!
Be keen with how you use the trowel in applying the first coat. Make sure that your plaster is spread as thinly as possibly simply by using thin strokes. Be sure not to use the same direction but you can use random or patterned strokes. Some dry plaster on the trowel might affect your plastered areas but you can avoid it by cleaning the trowel after a few strokes. Starting from a top corner would work best for your plastering.